The first-ever micro-fiber veil* to unlock the rejuvenating power of skin.
Much like Koishimaru Silk, the silky fiber of Fine Fiber Technology spins into an ethereal veil to help seal in moisture and the potent technologies of your skincare like a cocoon.
Wear overnight to tap into skin’s hidden beauty reservoir and wake up to renewed beauty.
Experience SILK SKIN like never before.
BIOMIMESIS VEIL. Unveiling the next chapter of your beauty journey.
This lamellar essence infuses skin with moisture and prepares skin for the application of BIOMIMESIS VEIL POTION.
With BIOMIMESIS VEIL POTION, they work synergistically to lock-in moisture and enhance your night-time skincare by improving skin’s moisture barrier, leading to SILK SKIN.
Apply before spraying BIOMIMESIS VEIL POTION.
The VEIL DIFFUSER is an electronic device that is used to spray a micro-fiber veil onto the skin, after inserting the BIOMIMESIS VEIL POTION. The device takes advantage of the difference in electrical charges between the skin and BIOMIMESIS VEIL POTION to form a fine transparent veil onto the skin.
This specialised polymer solution is inserted into the BIOMIMESIS VEIL DIFFUSER to spray a micro-fiber veil that protects the skin from external factors such as dryness and friction. Combined with the VEIL EFFECTOR, the veil helps keep skin hydrated and enhances your night-time skincare by improving skin’s moisture barrier, leading to SILK SKIN.
It is a special item which enables the veil to adhere to areas which are difficult to spray directly, such as under the eyes. It can also be used to blend the veil into the skin.
Applied at the very end of your night-time skincare routine, this single micro-fiber thinner than 1 μm forms a veil so fine as to be almost imperceptible that adheres to the complexion with the smoothness and comfort like that of Koishimaru Silk.
As you sleep, skin’s hydric environment is enhanced, generating favourable conditions for visible improvement.
In the morning, wake up to renewed beauty - smooth, youthfully radiant and intensely hydrated SILK SKIN like never before.
STEP 1: Apply the VEIL EFFECTOR
STEP 2: Pass Liquid
Set the mode switch to the droplet symbol. Press the main switch and allow 1-2 drops to be released from the nozzle (Wipe away liquid with a tissue).
• "Passing the liquid" is the act of allowing the veil liquid to pass through the tip of the nozzle in droplets before spraying.
• This must be done each time before using the VEIL DIFFUSER.
Use the device in areas of low humidity, such as your living room or bedroom.
When used in areas where humidity is too high, such as near the bathroom, the veil may not spray correctly.
• Temperature: 15-35 ℃
• Humidity: 25-75 %
STEP 3: Spray with the VEIL DIFFUSER
STEP 4: Blend into skin by pressing with your hands
STEP 5: Remove the clear veil the next morning
Skincare Steps for the VEIL APPLICATOR
— Overall Steps —
— Steps to use the VEIL APPLICATOR —
STEP 3: Spray veil on the VEIL APPLICATOR
Set the mode switch of the VEIL DIFFUSER to 1, and spray veil from a distance of about 8cm (the width of a fist) for about 10 seconds.
Q. How is the veil created on the skin surface?
A person’s body (including the face) takes on a negative electrical charge when they touch the main switch and grounding plate. The veil has a positive charge, so it attaches to the face.
Q. Can I use an another essence instead of the VEIL EFFECTOR?
The VEIL EFFECTOR is specially developed to form the ideal veil with the fiber. You can not create the veil properly in case you use another essence. Please use the VEIL EFFECTOR
Q. Can I use the BIOMIMESIS VEIL during the daytime?
If you use the BIOMIMESIS VEIL during the daytime, it may cause the veil to peel off because it could come in contact with hands or clothes. We recommend using the BIOMIMESIS VEIL only at night, and you can see the skin differences and benefits the following morning.
Q. If I use a facial mask, when should I?
Please use the facial mask at any of the steps before the VEIL EFFECTOR.
Q. Is it possible to apply make-up after using the BIOMIMESIS VEIL?
We don’t recommend applying make-up on the BIOMIMESIS VEIL. Please use the BIOMIMESIS VEIL as the last step of night-time skincare.
Q. When do you use the mode switch 1 ?
When you set the mode switch to 1, you can spray little by little. In normal usage, please set the mode switch to 2.
Q. The veil sprays on my skin in a liquid form. What can I do?
Spray at a distance of approx. 8 cm (the width of a fist) from your face.
Use in the recommended environment, with temperatures between 15-35 ℃, and humidity between 25-75 %.
Q. If I forget to set the mode switch to 0 after use, what will happen?
It won’t cause nozzle blockages or battery reduction. However, if you accidently press the main switch when the mode switch is set to anything other than 0, it may cause the VEIL POTION to leak or cause static electricity. Please make sure you set the mode switch to 0(OFF) after use.
Q. The veil had come off when I woke up the following morning. What should I do?
The amount of the VEIL EFFECTOR or spraying of the VEIL POTION may not be enough. Please use the appropriate amount of the VEIL EFFECTOR (2-3 pushes) and the VEIL POTION (approx. 30 seconds for each cheek).
Q. Can I use it around the eyes?
To avoid the veil getting into the eyes, please don’t use around the eyes. Please use the included eye guard when spraying.
Q. Can the veil be sprayed on another person's face or hands?
The veil cannot be sprayed on another person. Please use only on yourself. Due to the product specification, the veil attaches to the person who is touching the main switch.
Q. How should we maintain the VEIL DIFFUSER and accessories?
Please gently wipe them with a dry cloth or tissue. Please don’t wash the VEIL DIFFUSER and don’t wipe it with a wet cloth because it may cause damage to the VEIL DIFFUSER. In addition, if you wipe them with liquid including ethanol etc., it may cause the device coating to come off or crack.
Q. Is it OK to store the VEIL POTION in the VEIL DIFFUSER for a long time?
Leaving it unused for a long period of time may cause it to dry out and become clogged. After pressing down the VEIL POTION nozzle, please use all the contents promptly (within approx. 3 months).
We recommend either using the VEIL POTION or passing liquid through the nozzle tip at least once a month after opening.
When storing, keep the VEIL DIFFUSER upright in its stand.
Q. Can I board an airplane with the VEIL DIFFUSER which contains the VEIL POTION?
VEIL POTION falls into dangerous goods concerning air transportation. Please contact the airline company for details.
Q. Can I send the BIOMIMESIS VEIL abroad by air?
Please contact the transporter for details.
Q. I felt some static electricity during use. Is it safe?
Due to the product specification, some static electricity may be felt. This is the same kind of static electricity you may encounter in daily life, and there is no risk to safety. We confirmed that it doesn’t have any negative effects on the body.
Q. We are afraid that the veil with a positive charge may affect the body. Is it really no problem?
The positive charge which the veil has gradually neutralizes after it attaches to the skin. It doesn’t cause any negative effects to the body. Please don’t worry.
Q. Can the skin breath while the veil is applied?
We confirmed the veil keeps air permeability because the veil is formed by piling up ultra-thin fibers.
Q. Can I use the BIOMIMESIS VEIL on the area with pimples or inflammation?
We recommend not to use on areas with pimples or inflammation, as is with general cosmetics products.
Q. If the veil gets into the eyes, what should I do?
We confirmed safety of the product with the eyes. If the veil gets into the eyes, don’t rub the eyes and rinse immediately with plenty of water. If any symptoms persist, please consult your ophthalmologist.
Q. The liquid leaks from the nozzle tip. Is it defective?
If you don’t close the device cap correctly, the liquid may leak from the nozzle tip. After spraying, please ensure the device cap clicks closed and store it upright in the stand. In case you still can’t solve the problem, please contact the store where you purchased the product.
Q. Water, liquid or a foreign object accidentally got into the VEIL POTION slot. What should I do?
Please take the product to the shop for inspection and/or repair.
FAQ for the VEIL APPLICATOR
Q. What kind of material is the VEIL APPLICATOR made of?
The applicator is made of NBR (nitrile rubber), and the surface is specially treated so that the sprayed veil easily adheres to the skin, optimised for BIOMIMESIS products.
The special treatment is a proven surface treatment method for make-up sponges, so it can be used safely.
Q. Can I use a normal foundation sponge instead?
The applicator is made from special surface-treated material, appropriate to be sprayed properly with the electrical VEIL DIFFUSER, and is of a size and shape that fits easily to areas such as under the eyes. It’s not possible to spray the veil properly or apply appropriately under the eyes with a general makeup sponge.
Q. How do I wash the VEIL APPLICATOR?
Wash using diluted neutral detergent by gently pressing with your fingertips. Rinse well then drain off excess water, and dry in the shade.
Avoid using hot water or soaking. Dry well before putting in a case.
Q. When spraying the veil onto the VEIL APPLICATOR, some liquid droplets flew out and dried in white lumps, and I can’t remove them. What should I do?
Using the VEIL APPLICATOR with white lumps on the surface will not allow the veil to apply well.
When the veil dries in white lumps, first gently wipe off with an alcoholic wipe or similar, then wash with diluted neutral detergent, rinse well and dry.
Q. Why are there white lumps stuck to my VEIL APPLICATOR?
If the VEIL APPLICATOR and the VEIL DIFFUSER are too close together, liquid droplets will come out without forming a veil.
If any liquid droplets land on the veil after spraying, the veil may melt, then dry in white lumps.
If liquid droplets stick to the veil, peel it off and start again.
Q. How often should I wash it?
If, for example, the veil won’t detach easily from the VEIL APPLICATOR, or if it becomes visibly unclean, you should wash it.
Q. Should I wash off any VEIL EFFECTOR if it gets on the applicator?
Wash off if it starts to become noticeable.
Q. What should I do if there is any veil remaining on the applicator after application?
Lightly rub the surface with a tissue or similar to remove.
Q. Can I use the VEIL APPLICATOR while it's wet? (Can I use it immediately after washing?)
After washing, use after letting it dry, or after squeezing out most of the water.
(It’s possible to use while wet.)
Q. Can I do the whole eye area with a single application?
Adjust to the size of the area you want to apply the veil on, and apply two times or more.
Q. Is it OK if I change the order and do the BIOMIMESIS VEIL spray process first, then use the applicator?
A cohesive veil will form by applying with the VEIL APPLICATOR first, then completing the spray process.
If the order is opposite, the veil may peel off.
Q. The veil gets on my fingers.
Do not hold the VEIL APPLICATOR with your fingers. Lay it in your palm and spray the veil.
Q. I can’t spray it properly if it’s on a flat surface.
This product is designed so that the veil sprays on properly if the VEIL APPLICATOR is placed in one hand and the other hand holds the VEIL DIFFUSER while pressing the main switch. Always have the VEIL APPLICATOR in your hand while spraying.
Q. Why should the switch be on 1 to spray?
When set to 1, the veil comes out little by little, meaning it more easily forms an even layer on the VEIL APPLICATOR.
Q. I am having difficulty spraying the veil on the VEIL APPLICATOR.
・If the humidity is too high while using the device, it may not spray well, for example it may be difficult to aim or the veil may become flocced. We recommend an environment of between 15 and 35°C, and between 25 and 75% humidity.
・Only use when a sufficient amount of liquid has been dispensed while set to the droplet mark (or after cleaning the nozzle with the stick).
・Please use away from the effects of breeze, such as from an air conditioner.
Q. Where should I use the VEIL APPLICATOR?
Use for places like below the eyes, alongside your nose or your nasolabeal lines, where it is difficult to spray the veil on directly.
Do not use on places such as your eyelids or where hair is present (like your eyebrows) as application is difficult.
Q. The veil will not adhere to the skin properly.
・It won't adhere to your skin if your skin is dry. Always apply the VEIL EFFECTOR first.
・If the surface of the VEIL APPLICATOR is unclean or there are leftover bits of veil stuck to it, it won’t apply well. Wash the VEIL APPLICATOR clean before using.
・The veil may remain on the VEIL APPLICATOR if it is not pressed against the skin sufficiently. Press the entire VEIL APPLICATOR evenly onto the skin, making sure that the veil is adhering well to the skin.
Q. Can I use the applicator for anything other than applying the veil?
You can also use it to press on the veil to help it adhere to the skin after it’s been sprayed on. When doing so, press down from above without rubbing.
Q. Is it OK if I use in combination with my own cosmetics (such as wrinkle serum) in places like under my eyes or my nasolabeal lines.
Use your own cosmetics in the same order as you would normally use them. Use the BIOMIMESIS VEIL series as the very final step of your care routine.
Q. The veil has turned white and come away from my skin- what should I do?
If the veil turns white and comes away from your skin, add some more VEIL EFFECTOR by patting on from above.
Q. I didn't follow the order of VEIL APPLICATOR then spray, and accidentally sprayed my cheeks and forehead first. Is it OK if I now apply the veil to under my eyes etc. with the VEIL APPLICATOR?
Reversing the order will make it more difficult to apply the veil to your skin with the VEIL APPLICATOR. Apply the veil with the VEIL APPLICATOR first, then spray directly onto your face.
You can disable or delete cookies in your browser settings. However, this makes certain services, including services requiring login, unavailable.
In order to analyze user access and optimize advertising distribution, SENSAI Cosmetics Inc. have acquired statistical website usage information through cookies or web beacons operated by 3rd party service providers (*1) and also distributed advertising via 3rd party service provider on their websites. The cookie information used for access analysis or advertising distribution by 3rd party service providers cannot be used to distinguish an individual. SENSAI Cosmetics Inc. in conjunction with 3rd party service providers have optimized and distributed advertising (ex. retargeting advertising and behavior targeting advertising) based on the customer’s previous access to SENSAI website or other website with a combination of 1st party cookie (ex. Google Analytics Cookie) and 3rd party cookie (ex. DoubleClick Cookie).
(*1) 3rd party service providers whom SENSAI Cosmetics Inc. engage for web access analysis and advertising distribution refers to the following companies.
For details of cookie information use by 3rd party service providers, please visit their website linked below.
If you wish to disable cookies (opt-out), please access the opt-out pages of each 3rd party service provider described below and follow the steps to disable cookies. Please note that disabling cookies (opting-out) may restrict use of some services.
FreakOut, Inc. : https://js.fout.jp/info/privacy_en.html
Google Inc.: https://policies.google.com/technologies/ads?hl=en
Yahoo Japan Corporation: http://docs.yahoo.co.jp/docs/info/terms/chapter1.html#cf2nd
Facebook, Inc. : https://www.facebook.com/policy.php
D.A.Consortium Inc.: https://www.dac.co.jp/english/index.php/utility/marketone-data
Google Analytics: https://policies.google.com/privacy?hl=en
Yahoo! Access Analysis: http://docs.yahoo.co.jp/docs/info/terms/chapter1.html#cf2nd
Adobe Marketing Cloud: https://www.adobe.com/mena_en/privacy.html
Opt-out page for Google Inc.: https://adssettings.google.com?hl=en
Opt-out page for Google Inc. DoubleClick cookie: https://support.google.com/ads/answer/7395996?hl=en
Opt-out page for Yahoo Japan Corporation: http://btoptout.yahoo.co.jp/optout/preferences.html
Opt-out page for FreakOut, Inc.: https://js.fout.jp/info/privacy_en.html
Opt-out page for Facebook, Inc.: https://www.facebook.com/ads/website_custom_audiences/
Opt-out page for D.A.Consortium Inc.: http://feedback.impact-ad.jp/optout?a=mone
If you refuse to have your information collected by Google Analytics on SENSAI Cosmetics Inc. websites, you can suspend collection of information by enabling the Google Analytics Opt-out Add-on on the following Google page.
Google Analytics Opt-out Add-on
Google Analytics Terms of Services
Google Policy and Terms